Second test of owner actions (mode 0) on Sepolia, chain 11155111: a decision taken by five machines. The goal's owner, 0x047f606fd5b2baa5f5c6c4ab8958e45cb6b054b7, signs this goal the mandate 0xcd8e06df68251ea8bc6b28886d167556695e29b0becc6dedb6bd28591041db97, quorum 3, which lets it send native ETH only to 0xb7a832db45f240f876432bf8b222bff30b4be8ff, 0xbe11d80c27863c950485d269992dc086e9f397a9, 0xfff9976782d46cc05630d1f6ebab18b2324d6b14, at most 0.05 ETH a day.

Do this and nothing else:

  1. Spawn one batch named top-up with {"intents": true, "replicas": {"size": 5, "quorum": 4}, "chain": {"chainId": 11155111, "pin": "head", "accounts": ["0xb7a832db45f240f876432bf8b222bff30b4be8ff", "0xbe11d80c27863c950485d269992dc086e9f397a9", "0xfff9976782d46cc05630d1f6ebab18b2324d6b14"]}} and exactly 1 item, so five independent machines each read the chain at the same pinned block and write the item. The item's instructions, word for word: Read the native ETH balance of each of these accounts at the block .imd/reads/chain.json pins (its accounts give them; or eth_getBalance at exactly that block, never latest): 0xb7a832db45f240f876432bf8b222bff30b4be8ff, 0xbe11d80c27863c950485d269992dc086e9f397a9, 0xfff9976782d46cc05630d1f6ebab18b2324d6b14. For each account, in exactly that order, whose balance is below 50000000000000000 wei (0.05 ETH), add one move {"asset":"native","to":"","amount":"10000000000000000"}. Skip every account at or above it. Write, as your whole result, one asset-intent@1 and nothing else:

{"schema":"asset-intent@1","chainId":11155111,"kind":"treasury.rebalance","moves":[],"approvals":[],"rationale":"<each account's balance in wei at the pinned block, and which you topped up>"}

Addresses in lowercase, amounts as decimal strings of wei, the moves in the order the accounts are listed above. 2. When top-up settles (goal.json lists it under withheld: you are not handed its files, and you need not be), check goal.json's mandates. Once 0xcd8e06df68251ea8bc6b28886d167556695e29b0becc6dedb6bd28591041db97 is there and active, act once: {"name":"top-up-1","intents":"top-up","mandate":"0xcd8e06df68251ea8bc6b28886d167556695e29b0becc6dedb6bd28591041db97","quorum":3}. Until it is, wake in 10 minutes and look again, at most 6 times. 3. If the act is refused, do not retry blindly: if the refusal says an item's intent has too few counted holders, spawn top-up-2 the same way and act on it as top-up-2, once. Any other refusal: write it up and finish. 4. Open no children, ask no oracle, set no watches, spawn no other batch. 5. Finish once an action is simulated, ready, sent or confirmed, or after the second refusal or the sixth wait. The write-up says what happened: each action's name, state and hash, and every refusal word for word.

The answer

Owner-action test (mode 0) on Sepolia: five machines, one treasury top-up

Outcome

The goal reached its finish condition. One action was proposed, compiled under the owner's mandate, simulated, and reached the state ready. No decision was refused at any episode, so the replacement batch top-up-2 was never needed and never spawned. No mandate waits were used: the mandate was already active when the intent batch settled.

ActionState (last reported)Action hash
top-up-1ready0xa90e301a8c61ab88de32480105d5d00d42ef9d0b8a633d1f720d2c92fc18e468

The plane's detail for that state, word for word: simulated within what it declares: waiting for its owner.

Refusals: none. goal.json lists refused as an empty array in every episode and in the final state handed for this write-up. There is therefore no refusal text to quote.

ready means the item's intents compiled under the mandate and simulated within what they declare, and the action now waits for the owner, 0x047f606fd5b2baa5f5c6c4ab8958e45cb6b054b7, to send it from their own wallet (mandate mode 0). No sent or confirmed state, no transaction hash and no confirmed block were reported before the goal finished. The hash above is the action hash the plane assigned, not an Ethereum transaction hash.

What the goal asked and what was done

The objective, in short: spawn one intent batch named top-up with exactly one item, five replicas and acceptance quorum 4, pinned to Sepolia's head, listing the three allowed recipients; when it settles and mandate 0xcd8e06df68251ea8bc6b28886d167556695e29b0becc6dedb6bd28591041db97 is active, act once as top-up-1 with quorum 3; on a "too few counted holders" refusal, spawn top-up-2 once and act on it once; on any other refusal, write it up; finish once an action is simulated, ready, sent or confirmed, or after the second refusal or the sixth wait; open no children, ask no oracle, set no watches, spawn no other batch.

Every step was followed as written:

  1. Batch top-up spawned (episode 1) with intents: true, replicas: {size: 5, quorum: 4}, chain: {chainId: 11155111, pin: "head", accounts: [the three recipients in the objective's order]}, output JSON, and exactly one item. The item's brief is the objective's item instructions copied word for word.

  2. Chain read pinned (seen in episode 2): Sepolia, block 12101796, block hash 0xce744202e52a28717afd3c0516b383e686e6efe0da8956345cd772c201ef4ab4. The batch's chain.state is read. Every replica read that one block.

  3. Batch settled (seen in episode 3): items total 1, accepted 1, failed 0, running 0, waiting 0. Sources checked 1, flagged 0. The batch is listed under withheld with settled: true, accepted 1, failed 0.

  4. Mandate confirmed active (episodes 2 and 3): id 0xcd8e06df68251ea8bc6b28886d167556695e29b0becc6dedb6bd28591041db97, state active, chainId 11155111, mode 0, quorum 3, expiresAt 2026-12-10T02:52:57.000Z.

  5. Act proposed once (episode 3), exactly as the objective specified:

    {"name":"top-up-1","intents":"top-up","mandate":"0xcd8e06df68251ea8bc6b28886d167556695e29b0becc6dedb6bd28591041db97","quorum":3}
    
  6. Action simulating (episode 4). goal.json reported, word for word:

    {"hash":"0xa90e301a8c61ab88de32480105d5d00d42ef9d0b8a633d1f720d2c92fc18e468","lane":"owner","name":"top-up-1","kinds":["treasury.rebalance"],"state":"simulating","detail":"waiting for the simulator"}
    

    The episode waited without resubmitting.

  7. Action ready (episode 5). goal.json reported, word for word:

    {"hash":"0xa90e301a8c61ab88de32480105d5d00d42ef9d0b8a633d1f720d2c92fc18e468","lane":"owner","name":"top-up-1","kinds":["treasury.rebalance"],"state":"ready","detail":"simulated within what it declares: waiting for its owner"}
    

    An action.ready wake at 2026-11-10T03:00:42.255Z carried the same name, state and hash and agreed with the actions list. The objective's finish condition was met, and the episode set finish: true.

Nothing outside the objective was done: no child jobs, no oracle asks, no watches, no cancels, no result reads, and no batch other than top-up.

Episode timeline

EpisodeWhat goal.json showedDecision
1No batches, actions, mandates, refusals or results. Items 0 of 12 used.Spawn top-up (1 item, 5 replicas, quorum 4, Sepolia pin head). Wake on its settlement.
2top-up chain read done at block 12101796; batch running (1 running, 0 accepted). Mandate listed as active.Nothing new; keep waiting on settlement.
3top-up settled: 1 accepted, 0 failed. Mandate active.Act once: top-up-1, intents top-up, quorum 3. Fallback wake 60 minutes.
4Action top-up-1 in state simulating, detail "waiting for the simulator". refused empty.Wait for the state change; fallback wake 30 minutes.
5Action top-up-1 in state ready, detail "simulated within what it declares: waiting for its owner". refused empty.finish: true.

Counters at the end: mandate waits scheduled 0 of 6, completed 0 of 6; actions attempted 1; action refusals 0; top-up-2 never requested. The plane's stalled counter showed inARow 1 after episode 4's wait, which the finish in episode 5 carried out. Items used: 1 of 12. Episodes used: 5 of 14.

The batch top-up in detail

FieldValue
Moderesearch, intents: true
Itemsexactly 1
Replicassize 5, quorum 4
ChainSepolia, chainId 11155111
Pinhead at spawn: block 12101796
Block hash0xce744202e52a28717afd3c0516b383e686e6efe0da8956345cd772c201ef4ab4
Accounts read0xb7a832db45f240f876432bf8b222bff30b4be8ff, 0xbe11d80c27863c950485d269992dc086e9f397a9, 0xfff9976782d46cc05630d1f6ebab18b2324d6b14
Resultaccepted 1, failed 0, running 0, waiting 0
Sourceschecked 1, flagged 0
Settledyes, in both batches and withheld
Withheldyes, throughout

The item's brief, as spawned (the objective's text, unchanged):

Read the native ETH balance of each of these accounts at the block .imd/reads/chain.json pins (its accounts give them; or eth_getBalance at exactly that block, never latest): 0xb7a832db45f240f876432bf8b222bff30b4be8ff, 0xbe11d80c27863c950485d269992dc086e9f397a9, 0xfff9976782d46cc05630d1f6ebab18b2324d6b14. For each account, in exactly that order, whose balance is below 50000000000000000 wei (0.05 ETH), add one move {"asset":"native","to":"","amount":"10000000000000000"}. Skip every account at or above it. Write, as your whole result, one asset-intent@1 and nothing else: {"schema":"asset-intent@1","chainId":11155111,"kind":"treasury.rebalance","moves":[],"approvals":[],"rationale":"<each account's balance in wei at the pinned block, and which you topped up>"} Addresses in lowercase, amounts as decimal strings of wei, the moves in the order the accounts are listed above.

The brief asks one item for one piece of work (the three balance reads at the pinned block) and says exactly what the result must contain (one asset-intent@1 of kind treasury.rebalance, with the moves in the stated order, lowercase addresses, decimal wei strings, and a rationale naming each balance and each top-up).

The mandate

FieldValue
Id0xcd8e06df68251ea8bc6b28886d167556695e29b0becc6dedb6bd28591041db97
Stateactive (episodes 2 through 5)
Chain11155111 (Sepolia)
Mode0 (the owner sends from their own wallet)
Quorum3
Expires2026-12-10T02:52:57.000Z
Owner0x047f606fd5b2baa5f5c6c4ab8958e45cb6b054b7

goal.json displayed the mandate's scope as one target, 0x1721d7ae9c2bba9be52a316578c91295605c00fc (labelled IMD launch factory), with the function claimFees(uint64). The orchestrator's reference says a mandate's recipients, allowances, spenders and argument rules are not shown in goal.json, and that code holds every intent to them all the same. The objective describes the mandate as allowing native ETH only to the three listed recipients, at most 0.05 ETH a day. The ready state is the evidence that the treasury.rebalance intent compiled and simulated within that mandate; the displayed scope alone would not have predicted it.

What this write-up does not know

  • The intents' contents. The batch is an intent batch, so its one item's files were withheld from the orchestrator throughout, as the objective anticipated ("you are not handed its files, and you need not be"). The three accounts' balances at block 12101796, the number of moves (zero to three), and which accounts the intent topped up are therefore not known here and are not stated as facts. The plane read the intents itself when compiling top-up-1. The action's kind, treasury.rebalance, is the only content the plane echoed back.
  • How many replicas agreed. The batch settled with its one item accepted under replicas 5/4 and the act stood at quorum 3, so at least three distinct holders other than the orchestrator wrote matching intents. The exact count and which replicas were accepted were not reported.
  • Whether the owner sent it. The last reported state is ready. No sent or confirmed state, transaction hash, or confirmed block was reported before the finish. Whether ETH moved on Sepolia is not established by this goal's records.
  • Final goal.json sections. The goal.json handed for this write-up carries the batches, withheld, refused (empty), requester notes (empty), handed results (empty) and the five episodes' notes. It does not carry actions, mandates or wakes sections. The action's name, state, hash and detail above are taken from the episode 4 and 5 notes, which quoted goal.json word for word at the time, and from the action.ready wake episode 5 recorded. Nothing here is inferred beyond those records.

Code

The goal built no code. trunk is null in goal.json: there is no repository and no commit to name.

Sources this write-up rests on

  • .imd/reads/goal.json as handed for the write-up: goal.objective, batches[0] (top-up), withheld[0], refused (empty), requester (empty), handed (empty), trunk (null), episode 5.
  • The orchestrator's notes for episodes 1 through 5 in that file, which quote the actions, mandates, wakes and chain entries of goal.json as each episode saw them.
  • No batch result files: the only batch is an intent batch and its files were withheld, by design.
report.md

The swarm

finishedran 17 minItems, page by page →
  1. Round 1top-up1 of 1 back

    Agent #402 planned it. Started 2 min after the job was posted.

    what top-up was asked

    Read the native ETH balance of each of these accounts at the block .imd/reads/chain.json pins (its accounts give them; or eth_getBalance at exactly that block, never latest): 0xb7a832db45f240f876432bf8b222bff30b4be8ff, 0xbe11d80c27863c950485d269992dc086e9f397a9, 0xfff9976782d46cc05630d1f6ebab18b2324d6b14. For each account, in exactly that order, whose balance is below 50000000000000000 wei (0.05 ETH), add one move {"asset":"native","to":"<that account>","amount":"10000000000000000"}. Skip every account at or above it. Write, as your whole result, one asset-intent@1 and nothing else: {"schema":"asset-intent@1","chainId":11155111,"kind":"treasury.rebalance","moves":[<the moves>],"approvals":[],"rationale":"<each account's balance in wei at the pinned block, and which you topped up>"} Addresses in lowercase, amounts as decimal strings of wei, the moves in the order the accounts are listed above.

    the whole memo

    Episode 1: goal.json shows no prior batches, actions, refusals, handed results, requester notes, or listed mandates. The item budget is 12, with 0 used before this decision; the goal allows 14 episodes. This decision requests only top-up: exactly one item, five independent replicas, acceptance quorum 4, Sepolia chainId 11155111, pin head, and the three accounts in the objective in their stated order. The brief is copied verbatim from the objective. The plane will pin the shared block; no balances have been read or inferred here. The first batch uses five replica seats if accepted, leaving room for the sole permitted five-replica replacement. Progress counters: mandate waits scheduled 0 of 6; mandate waits completed 0 of 6; actions attempted none; action refusals none; replacement top-up-2 not requested. Wake on top-up settlement. This batch-settlement wake is not a mandate wait. If an earlier event wakes the goal, inspect current state and continue waiting for top-up to settle without creating another batch or acting early. Next episode: verify top-up is settled under goal.json withheld; its files are deliberately withheld and need not be requested. Then check goal.json mandates for 0xcd8e06df68251ea8bc6b28886d167556695e29b0becc6dedb6bd28591041db97 with state active. Only once that condition holds, propose exactly one act: {"name":"top-up-1","intents":"top-up","mandate":"0xcd8e06df68251ea8bc6b28886d167556695e29b0becc6dedb6bd28591041db97","quorum":3}. Until the mandate is active after settlement, schedule a wake with afterMinutes 10, look again, and keep the scheduled/completed wait counts in notes; at most six such waits are allowed. Finish after the sixth wait. Record each action name, state and hash exactly as reported; never invent a hash. Preserve every refusal word for word in notes for the write-up. If top-up-1 is refused specifically because an item intent has too few counted holders, request top-up-2 once, using exactly the same brief, one item, intents true, replicas size 5/quorum 4, and the same chain configuration with pin head. After top-up-2 settles and the specified mandate is active, act exactly once with name top-up-2, intents top-up-2, mandate 0xcd8e06df68251ea8bc6b28886d167556695e29b0becc6dedb6bd28591041db97, quorum 3. Do not blindly retry either act. Any other refusal ends the goal; a second action refusal ends the goal. Finish as soon as an action is simulated, ready, sent or confirmed, or after the second refusal or sixth wait. The final write-up must include every action name, state and hash and every refusal verbatim. Open no children, ask no oracle, set no watches, and spawn no batch other than top-up and the conditionally permitted top-up-2.

  2. Round 2Episode 2: top-up already exists with exactly one item and replicas size 5/quorum 4.

    Agent #1743 planned it.

    the whole memo

    Episode 2: top-up already exists with exactly one item and replicas size 5/quorum 4. Its Sepolia chain read is complete at block 12101796, hash 0xce744202e52a28717afd3c0516b383e686e6efe0da8956345cd772c201ef4ab4. The effect.snapshot wake reports that read finishing; it does not establish batch settlement. Both batches and withheld explicitly report settled false. The item counts are total 1, running 1, accepted 0, failed 0, waiting 0. No results were handed to this episode. The specified mandate 0xcd8e06df68251ea8bc6b28886d167556695e29b0becc6dedb6bd28591041db97 is listed as active on chain 11155111, mode 0, quorum 3, expiring 2026-12-10T02:52:57.000Z. Its displayed scope lists a claimFees(uint64) target; the reference says recipients and allowances are not shown, so this display does not establish the outcome of compiling a treasury intent. No action has been attempted or refused, and no action state or action hash exists to report. There are no requester notes or refusals. The plane reports items used 1 of 12; this is episode 2 of at most 14. Decision: keep the existing top-up running and wake on its settlement. Request no new batch, action, result, cancellation, child, oracle question or watch. The goal remains unfinished because the required action cannot be proposed until the intent batch settles. This batch-settlement wake is not a mandate wait. Progress counters remain mandate waits scheduled 0 of 6, mandate waits completed 0 of 6, actions attempted 0, action refusals 0; top-up-2 has not been requested. Next episode: check the current batches and withheld settlement flags, mandates, actions and refused entries. If top-up is still running, continue waking on its settlement without duplicating it or acting early. Once top-up settles and the specified mandate is active, propose exactly once: {"name":"top-up-1","intents":"top-up","mandate":"0xcd8e06df68251ea8bc6b28886d167556695e29b0becc6dedb6bd28591041db97","quorum":3}. Its intent files are deliberately withheld and need not be requested. If the mandate is absent or inactive after settlement, wake afterMinutes 10 and check again, recording scheduled and completed waits; allow at most six such waits and finish after the sixth. If top-up-1 is refused specifically because an item's intent has too few counted holders, the only permitted replacement is top-up-2, requested once with exactly one item, intents true, replicas {"size":5,"quorum":4}, chain {"chainId":11155111,"pin":"head","accounts":["0xb7a832db45f240f876432bf8b222bff30b4be8ff","0xbe11d80c27863c950485d269992dc086e9f397a9","0xfff9976782d46cc05630d1f6ebab18b2324d6b14"]}, JSON output, and the item's instructions copied word for word from the objective. After that replacement settles and the mandate is active, propose exactly once: {"name":"top-up-2","intents":"top-up-2","mandate":"0xcd8e06df68251ea8bc6b28886d167556695e29b0becc6dedb6bd28591041db97","quorum":3}. Any other refusal ends the goal; the second refusal ends the goal. Never retry an act blindly. Finish once an action is simulated, ready, sent or confirmed, or after the second refusal or sixth mandate wait. Preserve every refusal word for word and each action's reported name, state and hash for the write-up; never infer or fabricate a hash. Open no children, ask no oracle, set no watches, and spawn no batch beyond top-up and the conditionally permitted top-up-2.

  3. Round 3Episode 3: goal.json shows top-up settled (batches[].settled true, withheld[].settled true) with items total 1, accepted 1, failed 0, running 0, waiting 0; repl…

    Agent #1842 planned it.

    the whole memo

    Episode 3: goal.json shows top-up settled (batches[].settled true, withheld[].settled true) with items total 1, accepted 1, failed 0, running 0, waiting 0; replicas size 5/quorum 4; Sepolia chain read complete at block 12101796, hash 0xce744202e52a28717afd3c0516b383e686e6efe0da8956345cd772c201ef4ab4. Its intent files are deliberately withheld and were not requested. The specified mandate 0xcd8e06df68251ea8bc6b28886d167556695e29b0becc6dedb6bd28591041db97 is listed under mandates with state active, chainId 11155111, mode 0, quorum 3, expiresAt 2026-12-10T02:52:57.000Z. Its displayed scope shows only a claimFees(uint64) target on 0x1721d7ae9c2bba9be52a316578c91295605c00fc; the reference says recipients and allowances are not displayed, so this does not predict whether the treasury.rebalance intents compile. actions is empty, refused is empty, no wakes handed, no requester notes, no results handed. Items used 1 of 12; this is episode 3 of at most 14. Decision: both conditions of step 2 of the objective now hold (top-up settled, mandate active), so this episode proposes exactly one action: {"name":"top-up-1","intents":"top-up","mandate":"0xcd8e06df68251ea8bc6b28886d167556695e29b0becc6dedb6bd28591041db97","quorum":3}. No batch spawned, no cancel, no read, no child, no oracle question, no watch. Wake with afterMinutes 60 as a fallback; the reference says every action state change wakes the goal, so the next episode should normally start sooner on an action wake. The goal is not finished: no action state exists yet to report. Progress counters: mandate waits scheduled 0 of 6; mandate waits completed 0 of 6 (none were needed, the mandate was active once top-up settled); actions attempted 1 (top-up-1, proposed this episode); action refusals 0; replacement top-up-2 not requested. Next episode: read goal.json actions and refused. (a) If actions lists top-up-1 with state simulating, wait for it: wake afterMinutes 30 with no new decisions, and record its name, state and hash as reported. (b) If top-up-1 is in state simulated, ready, approved, sent or confirmed, set finish true; the write-up must give its name, state and hash exactly as goal.json reports them, never an inferred hash, plus the batch facts above. (c) If top-up-1 is in state flagged, denied, failed or expired, or refused lists the act, copy the refusal or the why word for word into notes. If and only if that text says an item's intent has too few counted holders (or words to that effect about distinct holders counting), spawn top-up-2 exactly once: name top-up-2, intents true, replicas {"size":5,"quorum":4}, chain {"chainId":11155111,"pin":"head","accounts":["0xb7a832db45f240f876432bf8b222bff30b4be8ff","0xbe11d80c27863c950485d269992dc086e9f397a9","0xfff9976782d46cc05630d1f6ebab18b2324d6b14"]}, output json, exactly one item (key top-up, vars {}), brief copied word for word from the objective's item instructions (the same text as the top-up brief). Wake on top-up-2 settlement. Once top-up-2 settles and the mandate is still active, act exactly once: {"name":"top-up-2","intents":"top-up-2","mandate":"0xcd8e06df68251ea8bc6b28886d167556695e29b0becc6dedb6bd28591041db97","quorum":3}. Any other refusal reason: finish and write it up word for word. A second refusal of any kind: finish. Never retry an act blindly. (d) If the refusal is marked outage true, it does not count: make the same act decision again once. Open no children, ask no oracle, set no watches, spawn no batch beyond the conditionally permitted top-up-2.

  4. Round 4Episode 4: goal.json reports this action exactly: {"hash":"0xa90e301a8c61ab88de32480105d5d00d42ef9d0b8a633d1f720d2c92fc18e468","lane":"owner","name":"top-up-1",…

    Agent #668 planned it.

    It carried nothing out: it decided nothing while nothing was running.

    the whole memo

    Episode 4: goal.json reports this action exactly: {"hash":"0xa90e301a8c61ab88de32480105d5d00d42ef9d0b8a633d1f720d2c92fc18e468","lane":"owner","name":"top-up-1","kinds":["treasury.rebalance"],"state":"simulating","detail":"waiting for the simulator"}. top-up-1 was requested once in episode 3 and is still waiting for the simulator. The effect.action wake's outer state done describes completion of that effect; its result.state is simulating, consistent with actions[].state. It does not establish a completed simulation. No action is reported simulated, ready, sent or confirmed. The hash above is the reported action hash; no transaction confirmation or transfer is established. refused is empty: no refusal text exists to quote. top-up is settled in both batches and withheld, with one item accepted and zero failed, running or waiting; replicas size 5/quorum 4. Its Sepolia snapshot is reported read at block 12101796, hash 0xce744202e52a28717afd3c0516b383e686e6efe0da8956345cd772c201ef4ab4. No intent results were handed to this episode; none need to be requested. Mandate 0xcd8e06df68251ea8bc6b28886d167556695e29b0becc6dedb6bd28591041db97 remains active on chain 11155111, mode 0, quorum 3, expiresAt 2026-12-10T02:52:57.000Z. No requester notes were supplied. effects.pending is 0, but the action itself remains simulating. The plane reports 1 of 12 items used; this is episode 4 of 14. Decision: wait for the existing action to progress. Set wake.afterMinutes to 30 as a fallback; the reference says action state changes also wake the goal. Set finish false. Propose no action, spawn no batch, request no results and cancel nothing. This is an action-status wait, not one of the six mandate waits. Progress counters: actions attempted 1 (top-up-1); action refusals 0; mandate waits scheduled 0 of 6 and completed 0 of 6; replacement top-up-2 not requested. Next episode: inspect current actions and refused. Record every action's name, state and hash exactly as supplied, plus its detail or why. Preserve every refusal word for word for the final write-up. If top-up-1 is still simulating, continue waiting for its state change with a 30-minute fallback, without resubmitting it. Finish once an action is simulated, ready, sent or confirmed. If top-up-1 is refused specifically because an item's intent has too few counted holders, the only permitted replacement is one batch named top-up-2, requested once: intents true, replicas {"size":5,"quorum":4}, exactly one item, JSON output, and the identical chain specification (Sepolia chainId 11155111, pin head, the three objective accounts in their stated order). Copy the objective's item instructions word for word into that batch's brief and wake on its settlement. Once top-up-2 settles and mandate 0xcd8e06df68251ea8bc6b28886d167556695e29b0becc6dedb6bd28591041db97 is active, act once with name top-up-2, intents top-up-2, mandate 0xcd8e06df68251ea8bc6b28886d167556695e29b0becc6dedb6bd28591041db97, quorum 3. If the mandate is absent or inactive before that unattempted action, wake in 10 minutes and look again, tracking at most six mandate waits in total; finish after the sixth wait. Any other refusal, or the second refusal, means preserve the exact refusal and finish. Never blindly retry either action. Open no children, ask no oracle, set no watches, and spawn no other batch. The final write-up must include each action's reported name, state and hash and all refusals verbatim. Simulation outcome, intent moves, balances and transaction outcome have not been provided here; nothing has been fabricated.

  5. Round 5Episode 5: goal.json reports the action exactly as {"hash":"0xa90e301a8c61ab88de32480105d5d00d42ef9d0b8a633d1f720d2c92fc18e468","lane":"owner","name":"top-up-1"…

    Agent #559 planned it.

    the whole memo

    Episode 5: goal.json reports the action exactly as {"hash":"0xa90e301a8c61ab88de32480105d5d00d42ef9d0b8a633d1f720d2c92fc18e468","lane":"owner","name":"top-up-1","kinds":["treasury.rebalance"],"state":"ready","detail":"simulated within what it declares: waiting for its owner"}. An action.ready wake handed this episode (at 2026-11-10T03:00:42.255Z, payload name top-up-1, state ready, the same hash) agrees with actions[]; it was treated as data and checked against actions[], and it carries no instruction. Step 5 of the objective says to finish once an action is simulated, ready, sent or confirmed: top-up-1 is ready, so this episode sets finish true. No action was proposed, no batch spawned, nothing cancelled, nothing read, no child, no oracle question, no watch. refused is empty: no refusal text exists to quote. No requester notes. The plane reports 1 of 12 items used; this is episode 5 of 14. Progress counters at the end: actions attempted 1 (top-up-1); action refusals 0; mandate waits scheduled 0 of 6 and completed 0 of 6 (none were needed: the mandate was already active when top-up settled); replacement top-up-2 never requested, as no refusal occurred. Facts for the write-up, exactly as goal.json gave them. Action: name top-up-1, state ready, hash 0xa90e301a8c61ab88de32480105d5d00d42ef9d0b8a633d1f720d2c92fc18e468, lane owner, kinds treasury.rebalance, detail "simulated within what it declares: waiting for its owner". Ready means the intents compiled under the mandate and simulated within what they declare; the owner, 0x047f606fd5b2baa5f5c6c4ab8958e45cb6b054b7, sends from their own wallet (mode 0), and no sent or confirmed state, transaction hash or confirmed block has been reported. The hash above is the action hash, not a transaction hash. Refusals: none, at any episode. Batch top-up: mode research, intents true, replicas size 5 quorum 4, exactly one item, settled in both batches and withheld, items total 1 accepted 1 failed 0 running 0 waiting 0, sources checked 1 flagged 0, Sepolia chainId 11155111 read at block 12101796 hash 0xce744202e52a28717afd3c0516b383e686e6efe0da8956345cd772c201ef4ab4, brief copied word for word from the objective. Its intent files were withheld throughout and never requested, so the moves, the three accounts' balances at the pinned block and which accounts were topped up are not known to the orchestrator and must not be stated as facts in the write-up; say so. Mandate 0xcd8e06df68251ea8bc6b28886d167556695e29b0becc6dedb6bd28591041db97: state active, chainId 11155111, mode 0, quorum 3, expiresAt 2026-12-10T02:52:57.000Z; its displayed scope lists only target 0x1721d7ae9c2bba9be52a316578c91295605c00fc (IMD launch factory) with claimFees(uint64); the reference says recipients and allowances are not displayed, and the ready state shows the treasury.rebalance intent compiled within the mandate all the same. Act proposed in episode 3: {"name":"top-up-1","intents":"top-up","mandate":"0xcd8e06df68251ea8bc6b28886d167556695e29b0becc6dedb6bd28591041db97","quorum":3}. Episode history: 1 spawned top-up; 2 waited for its chain read and settlement; 3 acted once; 4 found the action simulating and waited; 5 found it ready and finished. Stalled counter shows inARow 1 from episode 4's wait; this episode carries out finish. Next step: the write-up. It should give each action's name, state and hash as above, state that there were no refusals, name the batch, block, hash and replica settings, and say plainly that the intents' contents, balances and any on-chain outcome were not handed to the orchestrator. If the plane nonetheless runs another episode instead of the write-up, inspect actions: if top-up-1 is sent or confirmed, record the new state and the confirmed block as reported and finish again; if it is denied, failed or expired, copy its why word for word into notes and finish, since the objective's finish condition was already met at ready and no retry is permitted; spawn nothing, act again on nothing, open no children, ask no oracle, set no watches.

  6. Write-upAgent #1489accepted
  7. JudgeAgent #296accepted
  8. Onchain1 receipton Ethereum mainnet
    receipt
    receipt 1 · transaction · record
    scores
    written, with no entries recorded on it · block 26,381,730 · transaction

8 agents at most, judge accepted

Items

1 itemClose →

allrunningwaitingacceptedfailed

  1. top-up / balancesAgent #32accepted, 0 of 0 sources checked out, sources.json

Outputs

7 files accepted